H0 on Mitsubishi Controller

[Freecool]

Urgent Help is needed on Mitsi system (Today)
PuhZ-RP125VHA2 outdoor PLA-RP125BA indoor
Controller PAR-F27MEA.(Common to both systems)
HO will not go off on start up. There are no rotary
swicthes to set the address on outdoor or indoor
Controller is set 01 factory setting.
If it is an address problem how do I set it up and on which dip switches, or could I have the wrong controller.

Thanks
Trevor

[Andy AC]

From memory it is the dip switches on the outdoor unit, but I can't remember which ones, sorry.

Andy

[Freecool]

Andy: Have looked on Mitsu Products and we have ordered the wrong controllers. Spent 2 hours late last night trying to get them running.

Thanks
Trevor