PDA

View Full Version : Trouble With A Bohn



stangman
23-08-2007, 03:48 AM
Hey First Post And I Have A Problem With A Chiller It Is A Bohn 135 That Has Two Hitachi Screws On It That Have Been Replaced Recently (past Two Years ) My Problem Is One Of The Units Is Tripping On High Head Erratically ,but Runs Fine Most Of The Time. I Have Had Old Refer Guys Tell Me That The Old Screws Deposited Chunks Of Seals From The Load/unload Piston Into The Condenser At The U-bends. Does Anyone Know Or Have An Educated Guess. Model#acwc135sd Serial#boc8002