PDA

View Full Version : Honeycombes



bernard
17-08-2007, 09:22 PM
Hi

Recently had a problem with newly installed george barker well freezers honeycombes icing up,I put it down to the store overstocking and blocking the airflow,however GB have now been round and replaced the honeycombes with metal louvers.If I stand at the end of the run and look down the hand rails I can see the cool air overshooting the freezers and spilling onto the shop floor.Surley this is not right?

Regards Bernard

Mark
17-08-2007, 10:11 PM
Are the cases fitted with DC motors.

Were the fixtures merchandised or empty.

bernard
17-08-2007, 10:14 PM
Hi Mark

The cases were fully stocked and have standard a/c motors.

Regards bernard

Mark
17-08-2007, 10:21 PM
Has the air spillage just occured after the changes, and how are the nose or rear capping heaters controlled.One of many possible reasons for Air spillage in cases can be caused by excessive drafts.

Mark