Out with the Old, In with the New

[frank]

Been a little busy lately up and down the country replacing aging equipment. Thought you might like to see some pictures

http://i116.photobucket.com/albums/o38/frankyboy_01/DSC_0105.jpg
STORK 300kw twin circuit condensing unit R22

http://i116.photobucket.com/albums/o38/frankyboy_01/DSC_0119.jpg
Waiting for the scrapman

http://i116.photobucket.com/albums/o38/frankyboy_01/DSC_0128.jpg
New kit arrives

http://i116.photobucket.com/albums/o38/frankyboy_01/DSC_0154.jpg
Here we go

http://i116.photobucket.com/albums/o38/frankyboy_01/DSC_0135.jpg
Gently does it

http://i116.photobucket.com/albums/o38/frankyboy_01/DSC_0164.jpg
2 x Daikin 150kw condensing units with stepless screw compressors

http://i116.photobucket.com/albums/o38/frankyboy_01/DSC_0186.jpg
The scrapman cometh

http://i116.photobucket.com/albums/o38/frankyboy_01/DSC_0191.jpg
First problem encountered. Why do they do that???

[NH3LVR]

http://i116.photobucket.com/albums/o38/frankyboy_01/DSC_0191.jpg
First problem encountered. Why do they do that???

Probably because the production people are not Refer People, and are under pressure to go as fast as they can.
One formerly fine American Manufacturer now assembles junk and trades on the name they used to have.
Another sends us junk that needs to be rebuilt on the site. We recently had to send back a $60,000 USD condenser because it was damaged in assembly and could not be repaired.
But the price competition means that a manufacturer who does a fine job cannot sell his product.
This does not include every one. FES and Frick still make good products, and innovate at the same time.

[frank]

And another project - to add 50kw to each AHU.

http://i116.photobucket.com/albums/o38/frankyboy_01/DSC_0004.jpg
Before we start

http://i116.photobucket.com/albums/o38/frankyboy_01/DSC_0056.jpg
Kit arrives

http://i116.photobucket.com/albums/o38/frankyboy_01/DSC_0057.jpg
Is landed into position
http://i116.photobucket.com/albums/o38/frankyboy_01/DSC_0062.jpg
Both in place

http://i116.photobucket.com/albums/o38/frankyboy_01/DSC_0066.jpg
Piped up

http://i116.photobucket.com/albums/o38/frankyboy_01/DSC_0073.jpg
Ariel view

http://i116.photobucket.com/albums/o38/frankyboy_01/DSC_0080.jpg
A cheeky shot of the finished project

[Abe]

I love your pics Frank.
Absolutely fantastic

Please keep them rolling

Abes

[thebigcheese]

i dont like the way the cantalever brackets are holding the crane arm up in the first pic he he

[The MG Pony]

Sweet pics, I love seeing work around the world, Definitely keep em coming mate!

[monkey spanners]

Very nice;)

Jon

[Jase]

Are the driers housed in the carrier units Frank?
This could be the start of a new thread...
take a pic of yer installs- only good ones though:)

[Brian_UK]

'ere Frank, Mister Elfan Safetee here.

Not one hard hat did I see, tsk, tsk.

Mind you, if you drop one of them a plastic hat won't stop it.

Great pictures Frank, thanks for sharing.

[robin r33 gtr]

Some very intresting jobs . Just wondering what was wrong with the first chiller ?

[frank]

Some very intresting jobs . Just wondering what was wrong with the first chiller ?

TEV's fitted wrong way round :eek:, poor maintenance, inexperienced techs looking after it etc

[frank]

Are the driers housed in the carrier units Frank?

Sure are Jase :)

[philjd26]

nice installation work pal....great pics

[frank]

'ere Frank, Mister Elfan Safetee here.

Not one hard hat did I see, tsk, tsk.

Great pictures Frank, thanks for sharing.

Look again Brian - my engineer on the back of the flat bed has his hard hat on as do I and I'm only taking pic's. :)

The guy in the compound is the slinger that came with the crane.

Hope some of you out there can post some pics of your projects

[Abe]

Id be honoured to show some of mine.....
:D:D