PDA

View Full Version : Software



prithviengg
22-07-2007, 08:08 AM
Hello Everybody,

I am Looking For software for designing Evoprative Condenser

Samarjit Sen
22-07-2007, 04:24 PM
I doubt wether any are available. Specially for designing the Condensers and Evaporators, you should do it manually, which is of course time consuming.

If you browse through the posts of this forum, you will find discussions on similar subjects. Maybe that would give you an idea.

Brian_UK
22-07-2007, 11:31 PM
There are various items of software available through the web.

Try Google with
"refrigerant condenser design software" and you will see several thousand.

Start here for a sample
http://www.coolit.co.za/coilsim/index.htm

but nothing beats doing it manually to know that you have understood what you are designing.

Magoo
02-10-2007, 04:49 AM
Basic calc is evap load plus motor drawn power plus a safety factor, plus an oil cooler load. Select at a pull down point and add a an overall comefortable factor, based on a wet bulb local condition at the worst peek. BAC Coil.com or similar may help.
regards Magoo