PDA

View Full Version : Re-enforced cap tube?



The MG Pony
14-07-2007, 08:02 PM
I got an A-Coil that I need to replace the cap tubes, they rubed through each other due to design incompitance, since I need to replace them I have seen them that have been coated in rhinoplastic coating! where can I get them and how much are they usualy?


Thanks.

Peter_1
14-07-2007, 08:56 PM
What's an A-coil?

The MG Pony
14-07-2007, 09:13 PM
http://k0swi.microlnk.com/REVIEW/AC/IMAGES/A_FRAME_INSPECTION_PANEL_COIL.JPG

The MG Pony
14-07-2007, 09:18 PM
The one I have has 10 channels going from a distributer, and need to replace them.

kiwireeferman
15-07-2007, 03:59 AM
Where there is a possibility of vibration I use the spiral cut tubing ( the type used in the electrical industry for bundling single core cables together)

This is easily fitted at any time and gives a lot of strength to the tube. You just have to wind it around and around and around. Ha Ha.

The MG Pony
15-07-2007, 04:08 AM
Ya I know the stuff, I want the plastic coated stuff now, no screwing around. The stuff is lovely, I've come across it twice and no idea the name of it.

Any one have a 1-1/2 Ton R-22 VGA charge, thermal static? and a 4 tube distributer?

The MG Pony
15-07-2007, 05:57 PM
FOUND IT! http://catalog.tycoelectronics.com/TE/bin/TE.Connect?C=1&M=BYPN&PID=163755&PN=VERSAFIT-1-0-FSP&I=13

Friend phoned me up who knew the stuff. Very nice way to protect the cap tubes from vibration damage and looks great on the tube!