PDA

View Full Version : Tesco, Fresh Fare



joe magee
13-07-2007, 02:22 AM
I'm a start up tech with a refrigeration company in southern cal. I will be starting up a tesco "fresh fare" soon. The question I have is with the controller they use. We just sent some of our ems techs to scotland to learn them. What do they use? and are they any different from e2s, rmcc /comtrol , etc.:confused:

supermarketguy
13-07-2007, 09:33 PM
Hi Joe,

Genarally Tesco use woodley and Danfoss ekc controllers. All new stores are now going to Danfoss ip controllers with danfoss 225 front ends in them. Packs are controlled in stores by einstein controllers and interfaced with front ends.

Hope this helps :D

coolhibby1875
22-07-2008, 08:26 PM
hi joe the controllers and front end going into your store are absoloute amazing once your all set up and commissioned to change a controller just plug the new one in and it will upload all the parameters from the front end.your guys when they come over will enjoy the training at rdm in glasgow the course is good and you learn loads