PDA

View Full Version : Spot Coolers Frezer







aaron crimmins
04-09-2002, 01:36 AM
I HAVE QUESTION THAT DAN COULD PROBEBLY ANSWER. I HAVE ABOUT 40 FREZERS, COOLERS TO LOOK AT FOR A GROCERY STORE AND THEY WOULD ALSO LIKE THEM TO BE MARKED IF THEY ARE DUAL TEMP. OR LOW TEMP. ONLY. THESE ARE CALLED " SPOT" OR "BUNKER" UNITS SMALL OPEN CHEST TYPE UNITS. MOST OF THEM ARE HUSSMANN UNITS. I CALLED HUSMANN TECH. ASSISTINCE AND THEY TOLD ME DUAL TEMPS. HAVE A TOGGLE SWITCH ON THEM BUT I HAVE NEVER SEEN A TOGGLE SWITCH ON A "SPOT UNIT". A LOT OF THE UNITS ARE MN:SM0811011. IS THERE A NUMBER OR LETTER IN THE MN THAT WOULD TELL ME IF THEY ARE DESIGNED FOR DUAL TEMP. OR LOW TEMP. I WOULD HATE TO SEND THEM OUT MARKED WRONG! THANKS IN ADVANCE.