The MG Pony
30-05-2007, 08:01 PM
I've got a sandwich cooler who was once repaired with a grossly under sized evap that rotted out, Now I need to find the correct type for it but have zero info on the thing! No numbers Nicht!!!
So I can give ya the dimensions: 4 to 5 feet long; ruffly three feet high and 4 feet wide; it has a top pan tray with hood of same length; but ruffly 2 feet wide.
Currently Some one has patched in a 3K BTU/h R-134a plant, and a 1200BTU TEV and evap. way to small for that kind of duty me thinks!
Problem was it wasn't able to keep the trays cold enough to pass HI (Health inspections) No wonder! So what is the factory evap that is supposed to be in there and what plant was shipped with the unit?
Any help will be a life saver, thanks!
So I can give ya the dimensions: 4 to 5 feet long; ruffly three feet high and 4 feet wide; it has a top pan tray with hood of same length; but ruffly 2 feet wide.
Currently Some one has patched in a 3K BTU/h R-134a plant, and a 1200BTU TEV and evap. way to small for that kind of duty me thinks!
Problem was it wasn't able to keep the trays cold enough to pass HI (Health inspections) No wonder! So what is the factory evap that is supposed to be in there and what plant was shipped with the unit?
Any help will be a life saver, thanks!