Gram Compressor

[Pootle]

I have recently come across a site with a number of Gram compressors, not having had much experience with Gram can anyone help me out with the best places to get info, parts and s/h compressors:confused:

[Brian_UK]

Pootle, it may be a silly question but are these Gram units actually made by Gram or have they stuck their label over the actual compressor manufacturers name?

Also I believe they are Italian ??, if so, why not get a better one anyway ;)

[SteveDixey]

The UK agency is now with Sabroe UK (formerly York Refrigeration, formerly Sabroe......) who can be found at their usual place in Birmingham. The technical advice person now resides there.

Sabroe will also supply the spares, ditto manuals, but I cannot comment on other sources.

I understand that after the York \ Sabroe merger, takeover or whatever happened, Gram compressors were "rationalised", i.e. they stopped making them.

Having a couple of Gram machines on a large A\C plant, I hope the spares situation does not deteriorate too soon

:(

Steve

[Andy]

Hi, Brian. Gram are Danish and at one time a rival to Sabroe, quite a good industrial compressor and well worth fitting. I to hope the spare are still available as they were the first recip I ever stripped and I still have a fondness for them.
Regards. Andy.

[C. Noseworthy]

York did "rationalize both Gram but they should still have spares available. I heard about a contact in South Africa who may be able to help with spares & Rebuilt compressors.
Try Buchu@yebo.co.za

[Hlynur Steinarsson]

Gram are good compressors for instant is the GSVII series with Grammatic 2505 control probably the best Gram. The control offers much more the for instant Sabroe Unisab.

[Hlynur Steinarsson]

Grammatic 2500 is a Frick Control. Made in the USA. The former Gram company was/is owned by York USA

[Sabroeclaus]

If you need any Gram parts we can supply if you have problems finding anywhere.
visit www.reftech.dk

[deecool]

If you need any Gram parts we can supply if you have problems finding anywhere.
visit www.reftech.dk (http://www.reftech.dk)


You can supply parts in the Philippines? I need Shaft seal of the Compressor.

[Tycho]

York supplies most Gram spares...

In Europe, I believe for any discontinued product, the manufacturer is obliged to have spares in stock for a minimum of five years, and be able to supply spares for a minimum of ten years.

If you could supply us with what it says on the product plate, I believe we could do more then just make suggestions :)

[abdulazman]

Hi Pootle :)

Check with YORK@Johnson Control for parts for GRAM. But if you require manuals ;) , I have with me the HC/HCL/HCS manuals. If you need it, email me, its content 1.78 MB.

[Josip]

Hi, Pootle, Deecool :)

I have recently come across a site with a number of Gram compressors, not having had much experience with Gram can anyone help me out with the best places to get info, parts and s/h compressors:confused:

Maybe you can visit this and see what you need:

http://www.sabroe.dk/
https://www.refparts.york.com/

Best regards,

Josip :)

[gregorm]

Hi,
I worked for a company down in West London that had approx. 40 Gram screws, a mixture of GST's & GSV's. We always got spares through Sabroe in Birmingham no problem. Also, as I was leaving they started to do service exchanges for us. They started off providing one for us, then used the bodies we were sending back.

Very good compressors by the way.

[Dexter]

We have been selling Gram compressors and parts since 1981, if you give a model and serial number of the compressor, I can help you with the shaft seal that you need if it's not too late

[winfred.dela]

Hi Dexter,
Would appreciate if you could give me Overhauling Spare parts price for following:

Two units Gram HCT 8100
Serial no: (1) 77-610-0080-195
Serial no: (2) 77-610-0080-196
Refrigerant: R 717
Year manufactured: 1995

We were ask to supply parts and overhauling.

Have tried finding price from local guys and also from reftech but no quote till now.

For any additional inquiry please email me at winfred.dela@gmail.com

Thank you in advance.

[tonychiefbay]

We have been selling Gram compressors and parts since 1981, if you give a model and serial number of the compressor, I can help you with the shaft seal that you need if it's not too late
Hello,Iam looking for complete Gram compressor type HC 8/75 with electric motor . Probably second hand .About 2 years old onwards . Do well to send me your quotations . Thanking you in advance and hopping to hear from you soon. Regards, Tony

[NH3LVR]

First;
Welcome to the Forum Dexter:)
Is Rick G still there?

Second;
I have worked with the company Dexter is employed by in the past. I can recommend them highly.

[404cab]

Hi,

Gram was building screw compressor under Frick license, so depending of where you are you can contact a Frick supplier or York/JCI supplier.

I highly recommend this web site :
refparts.york.com

very good for York, Stal, Sabroe, Gram parts

[ntfreezer]

who have information about gram compressor.
Thanks!

[lldelfin67]

Hi,
Gram recip compr. is Sabroe recip compr. and Stal recip. compre is one done by Sabroe. They have cross reference on each model. York/JCI will accomodate you on that.

[salman]

Hi Pootle :)

Check with YORK@Johnson Control for parts for GRAM. But if you require manuals ;) , I have with me the HC/HCL/HCS manuals. If you need it, email me, its content 1.78 MB.

I have got a Gram compressor HC 4075 1999 Could u send me the details about this compressor and the manual an other thing can i use this compressor with ammonia.
my email is tosalmans@hotmail.com
thank you