PDA

View Full Version : please tell me the use of HVACSIM+







Yuri Han
30-03-2007, 10:19 AM
I have a hvacsim simulation program.
but, i din't know how it use.
i have the menual of it, but this program is not running as the menual.
so, please tell me the use of HVACSIM+.
when i start this program(1st HVACGEN), in my case,
i enterd type number then the program was always automatically close the window.
i must solve this problem. please help me.
thank you.

nh3simman
30-03-2007, 11:25 AM
I have a hvacsim simulation program.
but, i din't know how it use.
i have the menual of it, but this program is not running as the menual.
so, please tell me the use of HVACSIM+.
when i start this program(1st HVACGEN), in my case, i enterd type number then the program was always automatically close the window.
i must solve this problem. please help me.
thank you.


I thought it was just me!!!

How is is possible that these people can write so much code and get so much exposure and produce a program that is so inaccessible?


Yuri, if you can find an email address somewhere in the program source, send this thread to them and let's see if we can get some discussion going.

Yuri Han
05-04-2007, 06:04 AM
ok, i'wii find the program source...

mgaller
10-11-2008, 03:13 PM
Hi Yuri,
I may know the solution to your problem with the HVACGEN program. It needs to have the file typar.dat in the same directory. You may have seen an error message like this:
---
Enter the type number (or TYPES for list of types)
=>
4
INITIALIZING TYPES INFORMATION...
Cannot open typar.dat or h:/ash825_3/data/typar.dat
Fatal error

D:\BIN>

---
If that is the error message, just copy the typar.dat file to the directory you are running HVACGEN in.
You posted your question a while ago, so let me know if you have solved your problem, or if you have a different problem.

Peter_1
10-11-2008, 10:50 PM
Yuri Han only came here to find a crack for his illegal program.
The manufacturer could solve his problem

nh3wizard
11-11-2008, 02:22 PM
Yuri Han only came here to find a crack for his illegal program.
The manufacturer could solve his problem

Thats why I did not understand why he didnt just contact the company direct?

mgaller
13-11-2008, 02:35 PM
Yuri Han only came here to find a crack for his illegal program.
The manufacturer could solve his problem

HVACSIM+ is distributed freely, so I don't think he had it illegally.

While the manufacturer may have helped him, he could also have solved his problem much quicker by opening the README1.TXT file that came with HVACSIM+.