PDA

View Full Version : daikin ac charge problem



colicool
24-03-2007, 10:00 AM
Hi, I'm working on a daikin ducted system with an outdoor unit R125FJ7W1 refrigerant is R22 and the pipe length of about 10mtrs, can anyone help with the correct charge, starting and running current for this unit?

Brian_UK
24-03-2007, 09:02 PM
The data you want should be on the plate attached to the unit.

cool#9
24-03-2007, 09:43 PM
Thread.
It's my first reply on this forum i hope you'll find answer with the following attachement (pdf).
cool#9

colicool
25-03-2007, 09:37 AM
Thread.
It's my first reply on this forum i hope you'll find answer with the following attachement (pdf).
cool#9
Thank you very much for your help on this one, unfortunately the data plate was missing from the unit, thanks again.

colicool
25-03-2007, 09:39 AM
The data you want should be on the plate attached to the unit.
Thanks Brian but data plate missing from unit

cool#9
25-03-2007, 11:23 AM
Colicool
I checked the data of R125FY1 and the original charge is 3.0 kgs of R22.
The main difference between R125FJ7W1 and R125FY1 is that the first one is from Daikin Europe Factory so the technical data must be good.
Regards
cool#9

colicool
25-03-2007, 03:20 PM
Colicool
I checked the data of R125FY1 and the original charge is 3.0 kgs of R22.
The main difference between R125FJ7W1 and R125FY1 is that the first one is from Daikin Europe Factory so the technical data must be good.
Regards
cool#9
Thanks again cool#9 hope I can return the favour sometime.

frosty74
31-03-2007, 06:16 AM
they are usaully pre charged for a 30 metre pipe run and if a remember its 54grams per metre extra