PDA

View Full Version : Metastream coupling for compressor



Josip
14-01-2007, 11:56 PM
Need a help to find manufacturer of this coupling

Type: Metastream 7502-0055-0001-FQC 51

rpm 7000
el. motor 240HP/180kW-
1470 rpm x 4.731 from gearbox=

No good info found on Google:confused:

Thanks a lot,

Best regards, Josip :)

Brian_UK
15-01-2007, 12:03 AM
Are these the people you need Josip

http://www.johncrane.com/amer/english/product/ptc.html

(Googled on Metastream coupling)

US Iceman
15-01-2007, 12:06 AM
Well you beat me to it Brian. That's the same site I found.

Josip, if you still have problems finding it, please let us know OK?

Here is a link in your native language.
http://www.johncrane.co.uk/home.asp?r=it&l=it

Andy
15-01-2007, 12:08 AM
Need a help to find manufacturer of this coupling

Type: Metastream 7502-0055-0001-FQC 51

rpm 7000
el. motor 240HP/180kW-
1470 rpm x 4.731 from gearbox=

No good info found on Google:confused:

Thanks a lot,

Best regards, Josip :)


Josip:) what on earth is this fitted to. The coupling is as per Sabroe, but when have Sabroe fitted gearboxes to their screws. Sounds like something in the gas compression field

Please let us know;)

Kind Regards Andy:)

Josip
15-01-2007, 01:10 AM
Hi, all :)


Are these the people you need Josip

Dear Brian, seems they are, but my coupling is not listed there. I've been there before without success:( Maybe I have to download complete catalogue and then read it carefully. One reason can be it is quite old type and maybe out of production and available only as a spare part.


Well you beat me to it Brian. That's the same site I found.

Josip, if you still have problems finding it, please let us know OK?

Here is a link in your native language.
http://www.johncrane.co.uk/home.asp?r=it&l=it

My dear US Iceman, thanks for link but that one is in Italian language. Not my native language, but I can read it and understand a lot unfortunately cannot speak;)


Josip what on earth is this fitted to. The coupling is as per Sabroe, but when have Sabroe fitted gearboxes to their screws. Sounds like something in the gas compression field
Please let us know
Kind Regards Andy

Dear Andy, yes this one is for Howden oil free compressor for Propylene oxide in chemical industry here is my previous thread:

http://www.refrigeration-engineer.com/forums/showthread.php?t=5820

I will come back to this thread when we (I hope we will) finish all works and start compressor:)

We did general overhaul and one old coupling insert is damaged, exist one new but there must be always spare one.

Thanks for help.

Best regards, Josip:)

US Iceman
15-01-2007, 01:36 AM
Josip,

I'm sorry about the bad link. The homepage had a drop down box and Croatia was listed. When I selected this, the site I posted was the one that appeared.

Stupid websites...:mad:

Josip
15-01-2007, 01:41 AM
Hi, US Iceman :)


Josip,

I'm sorry about the bad link. The homepage had a drop down box and Croatia was listed. When I selected this, the site I posted was the one that appeared.

Stupid websites...:mad:

Please do not be :mad: the most important is your wish to help :)

I check the page and found this: link to Croatia brought me to here:

John Crane Italia (Grecia, Cipro, Malta, Croazia e Slovenia

Don't worry, please;) it was not your fault anyhow.

Best regards, Josip:)