PDA

View Full Version : Simulation Software



Vishnukurup
08-01-2007, 09:01 AM
Hi, Goodmorning!!

I am looking for software for coil selection and total system simulation for air conditioning application. If it includes hydronic coil selection also, it will be superb!
Experienced hands, please help!. Ready to buy.

NoNickName
08-01-2007, 09:59 AM
Many coil manufacturers have their own selection software for DX, condensing and water coils. Also please try the softwares available for download in the download section of this site.

nh3simman
23-03-2007, 10:42 AM
Hi NoNickName, I would like to try your software, what is the url?

nh3simman
23-03-2007, 10:55 AM
Before one of the network nannies delete this message take a look. It is not an advert. There is nothing for sale. It is only a technical paper with some ideas on simulating refrigeration systems.

I have done some theoretical work in this area and published a paper on the subject.

If you are interested, you can read the paper on-line.

http://www.coolit.co.za/refsim/articles/cyclesim/refsim.htm

lana
23-03-2007, 11:05 AM
Hi everybody,

Coolit software is not free:D .

For designing air coolers I have developed a software and use it all the time with good results.
Check the followings for free :
USAcoil and SPC2000.
I have to tell you that results from USAcoil are not always reliable:( :confused: (in my opinion).
Good luck.

NoNickName
23-03-2007, 11:25 AM
Hi NoNickName, I would like to try your software, what is the url?

It's not my software. Two possibilities: contact the coils manufacturers, or try the softwares in the download section here above.