PDA

View Full Version : hi everyone



Scott_becks
23-10-2006, 11:21 AM
hi everyone on RE.. i just signed up and had a look around and already found this site extremely useful. just wanted to introduce myself, im scott, im 20 years old and im a second year apprentice from australia. hi to everyone and hope to hear from you all in the future.

Brian_UK
23-10-2006, 07:00 PM
Welcome Scott, glad to see that you are busy posting already ;)

Peter_1
23-10-2006, 10:43 PM
Hello,

A warm welcome from Belgium.

Don’t hesitate to ask any question and share your knowledge and experience with us.
This forum is read worldwide and you may expect a professional answer.

May I ask you to add also your location to the RE Members Map?
You can find it in the Green Top bar, the lower line.

If you post a question with the units you’re used to work with, place between brackets the other units. So if you normally work with SI units (bar, °C, m³/h..), place then between these units the proper IP units.

You can do the conversion with a free software program Uconeer
You can find it on http://www.katmarsoftware.com/uconeer.htm#download
Or you can use the spreadsheet of Dan posted on http://www.refrigeration-engineer.com/forums/showthread.php?p=50617#post50617 post 6.

When you have a technical problem, try to post as many as possible readings you have made. You will see that we need many times condensing and evaporating pressure; discharge, suction, evaporator outlet and condenser outlet temperatures. Try to measure these very accurate.
The better you measure these, the better we can help you.

Note also band names, types of all the items installed in the installation.

I hope that you stay a long time with us and that you can contribute to expand this forum.

Peter

Josip
23-10-2006, 10:57 PM
Hi, Scott_becks :)

welcome to RE


hi everyone on RE.. i just signed up and had a look around and already found this site extremely useful. just wanted to introduce myself, im scott, im 20 years old and im a second year apprentice from australia. hi to everyone and hope to hear from you all in the future.


Check this link:

http://www.refrigeration-engineer.com/forums/showthread.php?t=6157

Best regards, Josip :)

Scott_becks
29-10-2006, 07:42 AM
thanks everyone.. nice to meet you all

winfred.dela
29-10-2006, 10:17 AM
hi everyone on RE.. i just signed up and had a look around and already found this site extremely useful.


Hi Scott and Welcome to RE Forum.

You will be surprised how much you will learn from this Forum.
Also, the members are very hospitable and knowledgeable.

Hope to read a lot of thread & post from you.

Regards,
winfredy

Abe
29-10-2006, 10:51 AM
Always good to welcome a Oz on here.
A warm welcome to you