DataBase link not working

[notme]

Hello and many thanks for all the information on here. Its been a great source of knowledge for my steep learning curve over the last few months. My main reason for wanting access to the database is I'm after an R22 superheat chart in Celsius. I suppose I could work with F if I must but I'm so used to C its a bit like trying to work with lbs and oz when Ive always been used to grams.

[Argus]

.

Welcome to the R E forum.

We know the Database link is down – Webram is working on it.

The link you need is a download called Coolpack. You can sign up for it here:

http://www.et.web.mek.dtu.dk/Coolpack/UK/

Good luck and keep posting.

.

[Peter_1]

Hello,

A warm welcome from Belgium.

Don’t hesitate to ask any question and share your knowledge and experience with us.
This forum is read worldwide and you may expect a professional answer.

May I ask you to add also your location to the RE Members Map?
You can find it in the Green Top bar, the lower line.

If you post a questions with the units you’re used to work with, place between brackets the other units. So if you normally work with SI units (bar, °C, m³/h..), place then between these units the proper IP units.

You can do the conversion with a free software program Uconeer
You can find it on http://www.katmarsoftware.com/uconeer.htm#download
Or you can use the spreadsheet of Dan posted on http://www.refrigeration-engineer.com/forums/showthread.php?p=50617#post50617 post 6.

When you have a technical problem, try to post as many as possible readings you have made. You will see that we need many times condensing and evaporating pressure; discharge, suction, evaporator outlet and condenser outlet temperatures. Try to measure these very accurate.
The better you measure these, the better we can help you.

Note also band names, types of all the items installed in the installation.

I hope that you stay a long time with us and that you can contribute to expand this forum.

Peter