View Full Version : xrv163-1.65
Gerben
15-09-2006, 02:28 PM
Hello,
i'm looking for a Howden XRV163-1.65.
Back here in the Netherlands there is no XRV available.
It may be a running machine, or scrap, and we will do an overhaul and make it run again.
Regards, Gerben
Tycho
16-09-2006, 02:05 PM
Maybe SES international can help, they are located in Delden
http://www.sesint.nl/index.php
Other than that, you could ask Howden
http://www.howdencompressors.co.uk/
anand
16-09-2006, 04:58 PM
If you need Howden XRV163-1.65 screw compressor capacity controller Type FKD40A + FKD41A equivalent to Danfoss make EKC30 + EKC31 please write to info@manikengineers.com They are regularly supplying to Kirloskar Pneumatics Ltd. who are manufacturing these screw compressors under lience from Howden UK for past 20 years.
Josip
16-09-2006, 08:24 PM
Hi, Anand :)
I do not want to be rude, but do you feel you push little too much :eek:
http://www.refrigeration-engineer.com/forums/showthread.php?p=50002#post50002
If you need Howden XRV163-1.65 screw compressor capacity controller Type FKD40A + FKD41A equivalent to Danfoss make EKC30 + EKC31 please write to info@manikengineers.com They are regularly supplying to Kirloskar Pneumatics Ltd. who are manufacturing these screw compressors under lience from Howden UK for past 20 years.
http://www.refrigeration-engineer.com/forums/showthread.php?p=40884#post40884
Hi
Why don't you send request at www.manikengineers.com They have exact equivalent of EKC30+EKC31 called FKD40+FKD41. I am sure their manual will also be same as EKC 30.
Regards
Anand
http://www.refrigeration-engineer.com/forums/showthread.php?p=38352#post38352
Danfoss EKC30 + EKC31 was excellent controller. However, it is now out of production. But you can get a pin to pin replacement for the same from India. It is called FKD40A + FKD41A. visit www.manikengineers.com for details
Maybe I'm not right but let's hear other guys;) Yes, sometimes we try to help with some links, but....
Best regards, Josip :)
TXiceman
16-09-2006, 10:36 PM
http://www.howdencompressors.co.uk/xrv.htm
Howdens XRV site. I'll send you a PM
Ken
If you need Howden XRV163-1.65 screw compressor capacity controller Type FKD40A + FKD41A equivalent to Danfoss make EKC30 + EKC31 please write to info@manikengineers.com They are regularly supplying to Kirloskar Pneumatics Ltd. who are manufacturing these screw compressors under lience from Howden UK for past 20 years.
Hi anand:)
Did you know that Kirloskar did the early XRV casings. Massive amounts of failures, put a lot of people of XRV's for good.
Casings are now made elsewhere and the problem has stopped. I am told the XRV is now quite a good compressor.
So for your referance I would say no thank you;)
Stop advertising on the cheap:) as we say in Ireland pony up:D
Kind Regards Andy:)
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.