xrv163-1.65

[Gerben]

Hello,

i'm looking for a Howden XRV163-1.65.
Back here in the Netherlands there is no XRV available.
It may be a running machine, or scrap, and we will do an overhaul and make it run again.

Regards, Gerben

[Tycho]

Maybe SES international can help, they are located in Delden

http://www.sesint.nl/index.php

Other than that, you could ask Howden

http://www.howdencompressors.co.uk/

[anand]

If you need Howden XRV163-1.65 screw compressor capacity controller Type FKD40A + FKD41A equivalent to Danfoss make EKC30 + EKC31 please write to info@manikengineers.com They are regularly supplying to Kirloskar Pneumatics Ltd. who are manufacturing these screw compressors under lience from Howden UK for past 20 years.

[Josip]

Hi, Anand :)

I do not want to be rude, but do you feel you push little too much :eek:


http://www.refrigeration-engineer.com/forums/showthread.php?p=50002#post50002

If you need Howden XRV163-1.65 screw compressor capacity controller Type FKD40A + FKD41A equivalent to Danfoss make EKC30 + EKC31 please write to info@manikengineers.com They are regularly supplying to Kirloskar Pneumatics Ltd. who are manufacturing these screw compressors under lience from Howden UK for past 20 years.


http://www.refrigeration-engineer.com/forums/showthread.php?p=40884#post40884

Hi
Why don't you send request at www.manikengineers.com They have exact equivalent of EKC30+EKC31 called FKD40+FKD41. I am sure their manual will also be same as EKC 30.
Regards
Anand


http://www.refrigeration-engineer.com/forums/showthread.php?p=38352#post38352

Danfoss EKC30 + EKC31 was excellent controller. However, it is now out of production. But you can get a pin to pin replacement for the same from India. It is called FKD40A + FKD41A. visit www.manikengineers.com for details

Maybe I'm not right but let's hear other guys;) Yes, sometimes we try to help with some links, but....

Best regards, Josip :)

[TXiceman]

http://www.howdencompressors.co.uk/xrv.htm

Howdens XRV site. I'll send you a PM

Ken

[Andy]

If you need Howden XRV163-1.65 screw compressor capacity controller Type FKD40A + FKD41A equivalent to Danfoss make EKC30 + EKC31 please write to info@manikengineers.com They are regularly supplying to Kirloskar Pneumatics Ltd. who are manufacturing these screw compressors under lience from Howden UK for past 20 years.

Hi anand:)


Did you know that Kirloskar did the early XRV casings. Massive amounts of failures, put a lot of people of XRV's for good.

Casings are now made elsewhere and the problem has stopped. I am told the XRV is now quite a good compressor.

So for your referance I would say no thank you;)

Stop advertising on the cheap:) as we say in Ireland pony up:D

Kind Regards Andy:)