PDA

View Full Version : New coil



NoNickName
12-09-2006, 08:34 AM
It was just delivered to us. It looked suspicious since it was unloaded from the truck. Bad looking repair with a brazed curve on the fork side.

In fact. It leaks hopelessly

TXiceman
12-09-2006, 06:04 PM
Definately looks like a poor solder job. Do you know if these were hand soldered or was the coil oven brazed?

Ken

NoNickName
12-09-2006, 09:12 PM
They were forks on that side, but then cut and weld by hand for repairing. Poor repairing.

monkey spanners
12-01-2010, 10:40 PM
Yes, this is a good article. Thank you for sharing. I've learned something. I'm waiting for more.


There you go Getit,

Everyday, a new lesson :D

Monkey

Brian_UK
12-01-2010, 11:57 PM
There you go Getit,

Everyday, a new lesson :D

Monkey
Sorry MS, this Getit is a time waster, all eight posts today exactly the same, word perfect. Dummies on the loose.

monkey spanners
13-01-2010, 12:24 AM
Yeah, they did seem a little limited in variety in their postings, takes all sorts to make a world i guess :D

NoNickName
13-01-2010, 08:31 AM
Yeah, he revived a 4 years old thread of mine, I didn't even remember what it was about.