View Full Version : New coil
NoNickName
12-09-2006, 08:34 AM
It was just delivered to us. It looked suspicious since it was unloaded from the truck. Bad looking repair with a brazed curve on the fork side.
In fact. It leaks hopelessly
TXiceman
12-09-2006, 06:04 PM
Definately looks like a poor solder job. Do you know if these were hand soldered or was the coil oven brazed?
Ken
NoNickName
12-09-2006, 09:12 PM
They were forks on that side, but then cut and weld by hand for repairing. Poor repairing.
monkey spanners
12-01-2010, 09:40 PM
Yes, this is a good article. Thank you for sharing. I've learned something. I'm waiting for more.
There you go Getit,
Everyday, a new lesson :D
Monkey
Brian_UK
12-01-2010, 10:57 PM
There you go Getit,
Everyday, a new lesson :D
Monkey
Sorry MS, this Getit is a time waster, all eight posts today exactly the same, word perfect. Dummies on the loose.
monkey spanners
12-01-2010, 11:24 PM
Yeah, they did seem a little limited in variety in their postings, takes all sorts to make a world i guess :D
NoNickName
13-01-2010, 07:31 AM
Yeah, he revived a 4 years old thread of mine, I didn't even remember what it was about.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.