PDA

View Full Version : New coil


NoNickName
12-09-2006, 08:34 AM
It was just delivered to us. It looked suspicious since it was unloaded from the truck. Bad looking repair with a brazed curve on the fork side.

In fact. It leaks hopelessly

TXiceman
12-09-2006, 06:04 PM
Definately looks like a poor solder job. Do you know if these were hand soldered or was the coil oven brazed?

Ken

NoNickName
12-09-2006, 09:12 PM
They were forks on that side, but then cut and weld by hand for repairing. Poor repairing.