View Full Version : can you identify this
Latte
08-09-2006, 08:36 PM
Hi Guys,
Shot in the dark, but can anyone identify the make of this under counter fridge
The unit has a CDC controller so dont think its a cornelius. Never come accross a Foster or Williams that look like this
Any ideas
Regards
Fatboy
Brian_UK
08-09-2006, 11:45 PM
Sorry buddy, it looks like a regular number four to me but could be mistaken.
Andy W
11-09-2006, 09:39 PM
Could be an H & G as used in McDonalds. Can we see a picture of the inside and the back as well as could be something as simple as a Levin.
Are you after parts for it, if so what parts.
Latte
11-09-2006, 11:46 PM
Hi Andy,
Need a door seal
V fitting - Magnetic - 625mm x 610mm
Think i will have to get one made up
tried all the usual candidates Foster, williams, gram and Cornelius.
may as well send the photo to interlevin see if they recognise it
Thanks
fatboy
Andy W
12-09-2006, 07:07 AM
Collins Extrusions are the best people for one offs.
If the cabinet is an H & G there will be a data plate on the unit base some where, not inside or the cabinet or behind but on the base. Good luck.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.