View Full Version : trane chiller
was working on a trane chiller model=ECGAL600 system 2 was showing a fault ACKT2 limiting then it cleared it"s self.running pressures look ok. 4bar and 10 half bar i think that fault code means water temp has past set point.am i close to meaning or miles away??
Lowrider
05-09-2006, 09:05 PM
It means load of compressor is limited due to high water temperature to protect itself!
So it could have shown this reading as a warning.the chiller was swicthed on after being off for a few weeks.thanks for the information
Lowrider
14-09-2006, 08:03 PM
When the temperature is too high the machine will protect itself, because the pressure will get too high!
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.