PDA

View Full Version : How do I Recharge-----



jacdu
22-08-2006, 01:59 AM
Is it possible for me, a newby with the basic knowledge, to recharge an upright freezer. It uses 134a with the low side at 120psi. The pump runs but the unit doesn't get cold. Just what do I need to do, other that call a repairman.
Thanks, jack

leftjobrunning
22-08-2006, 01:09 PM
Is it possible for me, a newby with the basic knowledge, to recharge an upright freezer. It uses 134a with the low side at 120psi. The pump runs but the unit doesn't get cold. Just what do I need to do, other that call a repairman.
Thanks, jack
Call a Techie, ffs man.

frank
22-08-2006, 07:35 PM
The Low Side @ 120psi - on R134a ?

Are you sure????? :confused:

Brian_UK
22-08-2006, 10:29 PM
120psi = probably is the test pressure shown on the label ;)

mr cool
05-09-2006, 11:22 PM
are you sure the compessor is pumping mate?

refteach
06-09-2006, 04:09 PM
I agree with mr cool, looking at the pt card, it gives me around 98 degrees, if you are in Texas I can believe the ambient for a non running compressor, but if your not that warm, the compressor is running, your in trouble, the running motor is heating up the can, but not pumping anything. :(

Peter_1
09-09-2006, 12:25 PM
Thepump is running????
In a fridge???

NoNickName
09-09-2006, 12:31 PM
The pump is running????
In a fridge???

No, it was a spelling mistake. He means the sump. :D:confused::cool::eek: