PDA

View Full Version : R410 manifolds



kris
04-08-2006, 10:30 PM
Am i being dumb!! just got a new set of 410 manifolds after my old set that i got 2nd hand went missing.

first job to press test a/c unit and found the new yellow charging hose,that you would fit to normal nitro fitting or bottle is the same size as the 410a fittings on the a/c

so it will not fit the nitro or a vac pump

do i need a fitting or something!!!!!!!!! i can only assume the old set had been modified by others as it had normal 1/4 fitting.

Smokey
04-08-2006, 11:36 PM
This set comes with standaed yellow hose and two 1/2" (red,blue)Two Way R410A Manifold with Charging Lines
http://www.bes.ltd.uk/products/graphics/15101.gif

Two way manifold with high quality aluminium body with sight glass. Bourdon type gauges, hook, 3 charging lines - connections 2 x 1/2" - 20 UNF (blue and red) and 1 x 1/4" SAE (yellow), length 36" (900 mm). Supplied in a sturdy plastic case. Temperature scale for gas: R410A. Pressure scales : bar and psi.Part

kris
04-08-2006, 11:53 PM
mine has 1/2 charging line........... does anyone know if their is a 1/2m to 1/4f adapter

Birds
05-08-2006, 09:56 AM
Refco manifolds for 410A seem to have 1/4 vac hose fitting but my Cps manifold is UNF and you need an adaptor .
SRW part No 100202 www.srwonline.co.uk

Hope this helps

kris
07-08-2006, 02:20 PM
cheers birds! on order .