PDA

View Full Version : An apology.



slingblade
28-07-2006, 07:56 AM
On the 22-07-06 i made a post in this forum which indicated that Fridgetech Ltd. was in some way related to the works which were being discussed at the time. i wish to point out that this is not the case, and as such offer this new thread as a Formal and total retraction of the comments i made.

I further wish to apologise the directors and staff of Fridgetech Ltd for any distress and inconvenience caused.
Apologies also to Webram and the administrators of Refrigeration-engineer.com for any distress and inconvenience caused.
Rest assured this will not happen again and i trust that this is a satisfactory conclusion for all parties involved.

Regards to all.

rbartlett
28-07-2006, 08:16 AM
Indeed it is..

On this issue in general we must all be aware that whilst we are only talking to a select few (us) the whole world is watching.

I will PM you

Cheers

Richard

Brian_UK
28-07-2006, 12:23 PM
Thank you Slingblade.

Peter_1
29-07-2006, 08:28 PM
Even if I haven't read the original post of Slingblade, wise decission man.
We all make mistakes and admitting it in public is never easy but testifies from a good education.

Dan
30-07-2006, 01:26 AM
Thanks, Slingblade.:)

Andy
30-07-2006, 12:00 PM
Slingblade:)

thank you:)

Kind Regards Andy:)

WebRam
30-07-2006, 01:16 PM
Thanks Slingblade.
I will close this thread now, its served its time and we should now get on with the site :)