View Full Version : Thermoking Thermoguad IV

Frozen P
21-07-2006, 11:59 PM
Hi guys, I'm new in this forum. Let me introduce myself, I'm Mr. Paulo Pereira, I'm from Costa Rica and I work with automotive computers. I received a Thermo King Thermoguard IV panel two days ago. The problem is I don't have any information about this module and it displays an alarm code. That code is the -05. the problem is this code doesn't appear in the code list. Can you help to find out what does this code mean, or wiring diagrams? If you can helpme, I would be very thankful to you!
Regards, Paulo.

23-10-2006, 01:02 AM
code 5
check ambient temp sensor

30-08-2010, 12:40 PM
hi my frends
I reset the processor, but later was on the screen as fahrenayt degree

How can I fix this nu.

30-08-2010, 02:41 PM
Thermoking Thermoguad IV

Hi friends

I reset the processor passed to the default settings, and approximately 30 seconds after the alarm was very fahrenayt error code is 61. Do you have to install new software.

Thank you for help me

30-08-2010, 02:47 PM
Hi friends

I'm Electronic Engineer refrigerated if you do complete software for vehicle engine parts just stayed in your hand to evaluate your condition.
Between -55 to +180 C temperature control system
Diesel engine control

yours truly