PDA

View Full Version : smeva cabinets



mike live
20-06-2006, 11:05 PM
would like to know if any one has worked on a smeva display firdge cabinets (mostly the vision models) having slight problem with keeping a food core temp lower than 4 degrees c . Getting my coil temp to around -11 and the air off at -6.5 with the air on at 3.4 . But still having a food core temp at 4.

al
23-04-2009, 06:26 PM
Mike

I know this is an old post but had you any luck resolving this, i'm having a similar problem on a vision serve over.

al