PDA

View Full Version : leaking fridge evaporator



rosliin
13-06-2006, 08:06 AM
Hi there!
I was accidentally punched the fridge evaporator. So what's the next step should I do to fix the problem.
If possible I don't want to purchase the new one evaporator. Please advise me.

Thanks.

Lucas
13-06-2006, 10:27 AM
Clean area around pierce with wire wool. Then wipe clean with solvent you get with epoxy resin needed to repair joint. Fit vac pump and run system in a very slight vac, apply resin and leave to set. Once set replace drier, pressure test, re-vac system and charge with refrigerant gass.
I choose to run very slight vac as it draws poxy and gives a very good seal, never had a leak yet, but rember the vac must be slight you don't wanna suck the epoxy around the evap.

Lucas

rosliin
15-06-2006, 03:55 AM
thanks Lucas

Abe
15-06-2006, 03:24 PM
Unless its your fridge, and you want to have a go, fine.
If its a customers...........dont bother