PDA

View Full Version : Sabroe SMC100 Compressor speeds



RANGER1
27-04-2018, 11:17 PM
Sabroe offer new SMC100 compressors at 1760rpm, has anyone experience with machines running at that speed good, or bad?

Grizzly
28-04-2018, 09:27 AM
Hi Ranger.

As of yet I don't look after any, nor have I heard anything about them.
Time will tell.
Grizzly

RANGER1
28-04-2018, 10:01 AM
Thanks, they have a new range of long life parts.
Just not used to such high speeds & that usually means will not last as long.
Mycom K at 1440 on ammonia seem to be able to do 20,000 hrs no problem, but light components like aluminium conrods.

josef
28-04-2018, 04:24 PM
RANGER1,
for a while on the market, but it seems OK Mk5.
I will probably be cautious with the long life of the parts until I believe it.

Josef.

RANGER1
28-04-2018, 10:35 PM
Sabroe brochure on long life parts.


http://www.sabroe.com/fileadmin/user_upload/Marketing/Brochures/Parts_and_AfterMarket_Solutions/3795_JCI_Long_Life_spare_parts3Year_ENG_Prt.pdf (http://www.sabroe.com/fileadmin/user_upload/Marketing/Brochures/Parts_and_AfterMarket_Solutions/3795_JCI_Long_Life_spare_parts3Year_ENG_Prt.pdf)

Sandro Baptista
30-04-2018, 02:51 PM
RANGER1,
for a while on the market, but it seems OK Mk5.
I will probably be cautious with the long life of the parts until I believe it.

Josef.

The lasts MK4 already could run at 1800 rpm as maximum and also with "LL" Long Life parts with wider maintenance intervals.

Josip
01-05-2018, 09:09 PM
Hi, RANGER1:)


Sabroe offer new SMC100 compressors at 1760rpm, has anyone experience with machines running at that speed good, or bad?

as Grizzly said "time will tell" ...

I believe machines are OK, but we know on site is a "real" work ... then a lot of things depend on operators, bosses and many other people or things ... and probably some (even LL) parts are much weaker then other .... again "time will tell" ...

If machines will run in shorter maintenance intervals ....
simply, you'll have more jobs with maintenance ;)...


Best regards, Josip :)

AKI
07-05-2018, 05:29 PM
Last year I made start up on 8 SMC 108 L with VSD and Sabroe sad its 1500 rpm max.

best regards
Aki

RANGER1
07-05-2018, 08:56 PM
Last year I made start up on 8 SMC 108 L with VSD and Sabroe sad its 1500 rpm max.

best regards
Aki

Maybe because of motor size it is limited to 1500 rpm.

The "E" compressor can only go to 1500 rpm.

http://www.sabroe.com/fileadmin/user_upload/Marketing/PowerPoints/Recips/SMC_100_Mk_5_presentation_JAE_01.2018.pdf

http://www.sabroe.com/fileadmin/user_upload/Marketing/Brochures/Compressors/SMC_Mk_5_SB-3982_GB120dpi.pdf

AKI
07-05-2018, 09:57 PM
I agree absolutely with Josip and just want to tell you be careful with this.Sabroe have many broken new compressors.Of course they hide that.