PDA

View Full Version : hoover optima



amrik
07-06-2006, 05:32 PM
hi everyone,the power led has gone out on the pcb..the board has been tested in an identical appliance and is at fault..

as a tv tech i have done alot of cold checks on the board and not found the fault..!

is anyone familer with this fault or no a source where i can obtain a circuit board at a modest cost..

a circuit will be usefull

id on board ...ispracontrols

Amrik

Brian_UK
07-06-2006, 10:30 PM
Hi Amrik and welcome.

Not trying to get rid of you a such but, try this site....
http://www.ukwhitegoods.co.uk
you might find some useful info there.

madfriday
16-06-2006, 01:11 AM
Hi Amrik, I repair these cabinets regularly and i can tell you the best place for an Ispra P.C board for a Hoover/Candy (same company!) is Q.E.R -Quality Electronic Repairs, at Workington, up near the Lake District. If they can't supply you with one they will repair yours. Find them on the web at www.qer.biz (http://www.qer.biz)
PS: Candy took over Hoover (or visa-versa!) a few years ago. Andy -Shrops