Emerson PAC networking

[Bipu]

Hi!
Hope all are well. i just facing a problem about 2 Emerson PAC networking that is how to connect 2 PAC (medium icom board to board) via crossed Ethernet cable? I did set unique IP address, U2U address etc. but it's not working!!

[narkom]

Are all the settings like that?

[Bipu]

Thank you, narkom. Yes, all settings are like that. But it's not working. Local Vertive(Emerson) authorised person told me that 'medium board cannot be connected via crossed cable! Is it right?

[narkom]

No, it is not. If you can connect a Coldfire display to medium board via crossed cable you can connect two medium boards via crossed cable. Why did you decide it is not working? Is there an Alarm message "Unit ## disconnected" or something else?

[Bipu]

Yes, there is an alarm that is "No connection with unit 01" or "unit 2". but crossed cable is connected and cable is checked and okay.