PDA

View Full Version : Sabroe 202 LM



nh3wizard
02-06-2006, 02:38 PM
Does anyone have the parts break down for a Sabroe 202 LM, I am having problems with the slide valve magnetic coupling on the slide valve pot:confused:

Andy
03-06-2006, 08:32 AM
Does anyone have the parts break down for a Sabroe 202 LM, I am having problems with the slide valve magnetic coupling on the slide valve pot:confused:

Hi nh3wizard:)

202LM is this one of the SAB range or is it a stal:)

I have hard copy manuals for both, and if it is a SAB I have a soft copy manual for a 163F which might be of use.

Kind Regards Andy:)

nh3wizard
05-06-2006, 12:44 PM
Ill have to get back with the operator at that location, get back to you soon.

Josip
05-06-2006, 02:36 PM
Hi, nh3wizard :)

SAB 202 LM is Sabroe compressor.

I have a soft copy instruction manual and list of parts with drawings.

Nh3wizard, Andy if you need it ;) send me a PM with email address.

Best regards,

Josip :)

nh3wizard
05-06-2006, 05:22 PM
Josip,

I PMed you with my email address, thanks for the info

nh3wizard
15-08-2006, 06:04 PM
Gentelmen,

I am looking for a part number for the magnetic coupling used for the slide valve position indicator, this connects to the spindle on one end and to the load postion indicator on the other, I have not had any luck with York / Frick on this. Sab 202 LM

Any help would GREATLY be appreciated.

York finally came through, if any one else needs it let me know and Ill send it to you:D

pete_d
05-11-2010, 12:06 PM
Hi, nh3wizard :)

SAB 202 LM is Sabroe compressor.

I have a soft copy instruction manual and list of parts with drawings.

Nh3wizard, Andy if you need it ;) send me a PM with email address.

Best regards,

Josip :)
Josip,
Please kindly email SAB 202 LM service manual to pete@pvt-worldwide.com.
Thank you so much

ranskikset
06-11-2010, 05:00 PM
We just chance that magneticcoupling and there was some improvent made for coupling. New one has some kind plastic tube holding magnets in place. We leave that plastic tube in place and everything works fine. Hope You understand my poor English:confused:

avico
07-11-2010, 04:12 AM
Hi, nh3wizard :)

SAB 202 LM is Sabroe compressor.

I have a soft copy instruction manual and list of parts with drawings.

Nh3wizard, Andy if you need it ;) send me a PM with email address.

Best regards,

Josip :)

Sir,
How are you? Long no see
Share it to me pls!

A.R.S ltd
10-11-2010, 10:40 PM
I have access to most Sab manuals certainly 202 let me know if you still require assistance

nrian larson
12-02-2011, 08:40 PM
Please contact johnson controls denmark and ask for tony jørgensen in the repshop , he can helps you. they have a repshop there they repair all models óf SABROE-STAL-GRAM -FRICK COMP.

kubus?
10-03-2011, 06:35 PM
I would be greatfull if You could please send me the SAB manuals, especially 202, and unisab II and III if possible.
My private e-mail is wojtowiczk@meil.pw.edu.pl.

Regards

K.