CARRIER / CARLYLE 06TUA554SW1C - overhauling

[Tazmaniak]

Hello,

We need to do some serios overhauling of 3 pcs of CARLYLE 06TUA554SW1C screw compressors, whish were flooded very heavily with contaminated water.

Does anyone have an exploded view, which could help signifacntly to do the repairs - it is alwas better to have manual, than to relay on instincts :)

Thanks in advance for any cooperation.

Ivailo

[mirza ateeq]

Please Follow the link

http://www.carlylecompressor.com/carlyle/en/worldwide/products/compressor/06tu/

[Tazmaniak]

Please Follow the link

http://www.carlylecompressor.com/carlyle/en/worldwide/products/compressor/06tu/

Sorry, no useful information. What we did:

[HVACRsaurus]

Thanks for the photos, did you get it running again?

[Tazmaniak]

We have to do some severe rust cleaning on the screws and other parts and change the bearings. Then we need the new evaporators to be installed on the chiller and after that we shall start it up. It is scheduled for mid October.

Meanwhile, we are posting images and videos on the progress at https://www.facebook.com/VashiatDomashenTehnik/?fref=ts

[Tazmaniak]

Thanks for the photos, did you get it running again?

OK, we started it agin....it was big, big, repairing....

https://www.facebook.com/VashiatDomashenTehnik/?hc_ref=ARQardO1cn6hz1ut2jp1VWfE-a0eYJh_8SjYYFCj9Pv2xtam1FssnPc8HUwWHic3Tkk&fref=nf

[Brian_UK]

Well done and thank you for updating us.

[CHARLIE-OSCAR]

OK, we started it agin....it was big, big, repairing....

https://www.facebook.com/VashiatDomashenTehnik/?hc_ref=ARQardO1cn6hz1ut2jp1VWfE-a0eYJh_8SjYYFCj9Pv2xtam1FssnPc8HUwWHic3Tkk&fref=nf

Glad to see it all running. It is good that you updated us and included pictures. Thank you. Look forward to your future post's on the forum. :cool: