PDA

View Full Version : Zanotti Units



Carlo Hansen
25-05-2006, 01:36 PM
I have been asked to make cooling in a wan, for a small
food company.
The Zanotti split unit F10D or F10M seems to be easy to
install. The unit is running on 12V-DC or by mains supply
1x230 AC.
Does anybody know something about thise units ?

Best regards
Carlo Hansen

thermo690
25-05-2006, 06:31 PM
Carlo Hansen]I have been asked to make cooling in a wan, for a small
food company.
The Zanotti split unit F10D or F10M seems to be easy to
install. The unit is running on 12V-DC or by mains supply
1x230 AC.
Does anybody know something about thise units ?

Best regards
Carlo Hansen

Here are some tech details:) You may need to up rate the vehicle's alternator
this unit has the same compressor as the old TK BO65 anyone who has worked on this unit will know why I menchin it
Martin


F10D
Refrigerator yield Room temp. 30°CChamber temp. 0°C 530W
Compressor 2 cylinders 43 cm³
Condenser ventilator helicoidal type direct feeder 12Vcc
Air capacity 910m³/h
Evaporator ventilator helicoidal type direct feeder 12Vcc
Air capacity 630m³/h
Electric motor feed 12Vcc (40A 350W)
F10M
Refrigerator yield Room temp. 30°CChamber temp. 0°C 745 W
T. amb. 30°C T. cella -20°C 298 W
Compressor 2 cylinders 43 cm³
Condenser ventilator helicoidal type direct feeder 12Vcc
Air capacity 940 m3/h
Evaporator ventilator helicoidal type direct feeder 12Vcc
Air capacity 630m³/h
Electric motor feed 12Vcc (65A 500W)
FZ114
Refrigerator yield Room temp. 30°CChamber temp.0°C1116W
T. amb. 30°C T. cella -20°C 402W
Compressor 2 cylinders 43 cm³
Condenser ventilator helicoidal type direct feeder 12Vcc
Air capacity 1000m³/h
Evaporator ventilator helicoidal type direct feeder 12Vcc
Air capacity 630m³/h
Electric motor feed 12Vcc (65A 500W)
Electric motor feed 230W / 1 Ph / 50 Hz / 1HP
feed 400W / 3 Ph / 50 Hz / 1HP


Contact details
ZANOTTI S.p.A. - 46020 PEGOGNAGA (Mantova) - Italy
Via Martin L. King, no 30 - Tel. +39 0376 5551- Fax +39 0376 536554
E-mail: info@zanotti.com - Internet: http://www.zanotti.com
0MAN113/E del 09-2002

thermo690
25-05-2006, 06:45 PM
I have been asked to make cooling in a wan, for a small
food company.
The Zanotti split unit F10D or F10M seems to be easy to
install. The unit is running on 12V-DC or by mains supply
1x230 AC.
Does anybody know something about thise units ?

Best regards
Carlo Hansen



Listed below is an alternative to the Zanotti from carriers web site (cut&paste)
Hope it helps
Martin

April 4, 2006 — Carrier Transicold introduces new Low profile NEOS 100 unit for small vehicles

PARIS, 3rd April 2006) – Strengthening its position as the leader in innovative heating and cooling systems, Carrier Corporation, a business unit of United Technologies Corp. (NYSE:UTX), today announced the launch of NEOS 100. The new electrically driven, self-contained “plug and play” unit for small vehicle refrigeration will be marketed and distributed through Carrier Transicold.

The NEOS 100 unit provides the small vehicle refrigeration market with the fastest and safest installation concept available today, as well as the lowest-profile choice, integrating into all vehicles up to 6m³.

The NEOS 100 unit’s installation concept is unique in the market. The unit is delivered pre-charged with refrigerant and pre-tested by the factory. The refrigeration circuit is completely closed at the time of installation meaning that no specialised technician is required, no time-consuming brazing or threading is necessary, and the installation time is drastically reduced – by an average of 50 percent compared with current product installations.

This new unit has reliability built in from the start. According to Neil Taylor, European Managing Director for Carrier Transicold, “Extensive experience suggests that closing the refrigerant circuit in this way eliminates one of the key reliability issues for traditional systems - the risk of leakage at installation. The benefits for the end-user and the environment are evident. In addition, pre-setting the unit at the factory means a safer and more reliable unit for the customer.“ The small unit dimensions and the monobloc concept allow for vehicle reinforcements to remain untouched by the unit. Vehicle rigidity is therefore maintained, whatever the vehicle model, ultimately increasing driver and cargo safety.

The system uses the vehicle’s alternator to produce electric power independent of engine speed. The power supply and all system functions are controlled by micro-processor system with cab command.

There’s no compromising on height when it comes to choosing a rooftop system. Now there is a real high-performance choice for either box or integrated insulation configurations. The new NEOS 100 unit offers the lowest height available in the industry at just 58mm making it a full 40 mm slimmer than its nearest competitor, and matching it with industry-leading capacity. In addition the NEOS 100 low profile unit is aesthetically attractive, adapts onto all vehicle types and can even be delivered the same colour as the vehicle.

There’s no compromising driver comfort, either. NEOS 100 is compatible with the vehicle air-conditioning and, with the principal components located inside the box, is discreet and quiet for the driver, too.

With a cooling capacity of 1110 watts at 0°C/+30°C and high airflow of 800m³/h, NEOS 100 is a real high-performance choice for the customer looking for reliability and cargo-protection. NEOS 100, for road only operation, will be available globally during the second quarter 2006. This road version can be fitted with a standby module during the third quarter, when the road and standby version becomes available. For more detailed information on the NEOS 100, turn to the experts within the Carrier Transicold's dealer network or visit the Carrier Transicold Web site at www.carrier-transicold-europe.com.


.

Carlo Hansen
27-05-2006, 08:58 AM
Hi

Thank you for the information, I will take a closer
look at the Carrier system.

Best regards
Carlo Hansen