View Full Version : Discharge pressure of ammonia compressor
manmohan
28-05-2017, 01:23 PM
How many psi maximum discharge pressure of reciprocating compressor
FaultCode
28-05-2017, 02:18 PM
Make and model number of compressor required before that can be answered.
Check manufacturers data sheet.
Hi
it depends on our condensing temp.
normally every company has own test pressure for that
RANGER1
28-05-2017, 10:39 PM
Maximum discharge pressure if system is designed correctly is 10-15% below lowest relief valve setting on high side of plant.
Relief valve should have been selected by looking at maximum design pressure on each pressure vessel or component.
Have a look at reliefs on compressor, high pressure liquid receiver & whatever in on high side.
What ever is lowest setting based on that you high pressure switch should be minimum 10% below that.
Segei
28-05-2017, 11:53 PM
Compression ratio should not be greater than 8:1.
manmohan
29-05-2017, 05:28 AM
Thanks you friends
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.