PDA

View Full Version : Discharge pressure of ammonia compressor







manmohan
28-05-2017, 01:23 PM
How many psi maximum discharge pressure of reciprocating compressor

FaultCode
28-05-2017, 02:18 PM
Make and model number of compressor required before that can be answered.

Check manufacturers data sheet.

mbc
28-05-2017, 04:57 PM
Hi

it depends on our condensing temp.
normally every company has own test pressure for that

RANGER1
28-05-2017, 10:39 PM
Maximum discharge pressure if system is designed correctly is 10-15% below lowest relief valve setting on high side of plant.
Relief valve should have been selected by looking at maximum design pressure on each pressure vessel or component.
Have a look at reliefs on compressor, high pressure liquid receiver & whatever in on high side.
What ever is lowest setting based on that you high pressure switch should be minimum 10% below that.

Segei
28-05-2017, 11:53 PM
Compression ratio should not be greater than 8:1.

manmohan
29-05-2017, 05:28 AM
Thanks you friends