PDA

View Full Version : A recent Job



Peter_1
05-03-2006, 02:41 PM
Our latest work.
Counter in and out the trailer.
Panel made by my son.

Peter_1
05-03-2006, 02:43 PM
Some more pictures.
Job wasn't completely finished.The fans are now partially covered with Corian.

The enclosure for the compressor section is standing open just behind the inclined condensor with 3 circuits in it: counter, cooling rooms and airco.

One of the windows is open, the switches are for the fans in case there's failing one.

Fans are fed via a safety 220 VAC/220VAC transformer (humidity)

Peter_1
05-03-2006, 02:45 PM
As usual..it all has to fit in a very narrow space.
The counter was test running, you can see the frost on the plate.
Underneath the counter are 2 probes for controlling the temperature.

slingblade
05-03-2006, 02:52 PM
Nice. is it just me or are the sol valves downstream of the driers?

Peter_1
05-03-2006, 03:05 PM
Euh.. sure...are you mounting those the other way perhaps :eek: :confused:

So you pump down each time your drier and sightglass in ice with every stop you make?

Why you're doing it the other way? I don't see it.

slingblade
05-03-2006, 03:13 PM
so you can pump over and change the drier:confused:

Peter_1
05-03-2006, 03:37 PM
http://www.sporlan.com/30-10.pdf

Read once this instructions very carefully http://www.ecopeland.com/Literature/Alco/NL_IT_FR_ES_DE_EN_ADK__65018.pdf

Peter_1
06-03-2006, 11:17 AM
Lichuan,

What do you mean with practical result of the finished product?

AndHow about the offset with your target of the system?

We do many things without calculating, more by experience, these things grow while installing them.
Of course, we calculate many things but not everything.

What are you interested in specific?

Lc_shi
07-03-2006, 07:06 AM
Hi peter,
Sorry not to make myself clear on the expression:)
I mean : the difference between what your customer need and what you supply, if you've not done it before,i think you need make some calculation.Maybe you've already got the experience ,it should be no problem.

thanks and regards
LC

ernestlin
26-06-2006, 07:19 AM
Great job!Peter, a beautiful and mobility refrigerated display vehicle. I found the pipes before evap is very complex, does it have heat recovery?

Abe
26-06-2006, 09:50 AM
Excelllent job Peter, As Ive said, bring this unit over to UK for a promotional tour

frederik79
17-08-2009, 12:06 AM
ziet er goed uit me likes :))

i am a fan

coolstuf
17-08-2009, 10:43 PM
Heel goed!:D

Frikkie
21-08-2009, 11:02 PM
Ek smaak jou werk baie boet. :)

Kp3
22-08-2009, 03:32 PM
Nice. is it just me or are the sol valves downstream of the driers?

sol valves should always be after drier it can shatter the drier particals

samabraham
21-02-2010, 10:46 AM
good job,it up
keep