ar12kv5hbwknna SAMSUNG AIRCONDITIONER- Need option code from remote

[Sandeep17]

Hi Guys
I have Samsung airconditioner Model ar12kv5hbwknna. Could someone kindly send me the option code for my model. or if possible Service manual for my Model. Thanks in advance.

Sandeep.

[Sandeep17]

The Sequences being Auto on 00; Cool On 00; Dry on 00; Fan on 00; Heat on 00; Auto Off 00;Cool Off 00; Dry off 00; Fan off 00; Heat off 00:

[Sandeep17]

guys just updating I have put the option code for AR12HSFNBWK/ET (0)10005 (1)56A37 (2)72328 (3)72534. The unit is cooling, But now the display on indoor unit not showing. any help?

[mbarizia]

found a solution for this? i have the same issue but with model : AR12KPFUFGMYSO

[Sandeep17]

Not the complete solution as my display is still not showing. I tried with different option codes corresponding to a different AR12 models. The cooling is acheived but display does not show.

[nike123]

Smart Install mode
This model supports Smart Install mode which checks installation status to find out if there is any problems with any of the
functions
. Execute Smart Install mode after installation .
1 .
Check the installation status of the air conditioner
.
1)
Check the power supply, service valve (if it's open), power cable of the indoor and outdoor unit and amount of
additional refrigerant required for pipe extension .
2)
Status of the indicator after supplying the power : Standby status
2 .
When the air conditioner is in standby status, use the remote controller to start the Smart Install mode
.
1)
Press the [SET], [Mode], [Power] button simultaneously for 4 seconds
.
f
f
Smart Install mode can be operated only with the supplied remote controller
.
f
f
During the Smart install mode procedure, remote controller cannot be operated