PDA

View Full Version : Single screw compressor McQuay HSW205QY27YA


azar
21-04-2017, 10:26 PM
Good afternoon. Already known problem. The check valve was torn off. The valve head fell and damaged the spool and rotor. I polished the valve and its saddle. It is necessary to assemble the compressor. But there is no IOM. I know how to expose the gaps of satellites. But where to look an axial backlash on a rotor - I do not know. I ask for help.
https://www.instagram.com/p/BSbaa7NBvCo/
Link to my instagram. There are all the photos of the dismantling and repair of the compressor.
HVACRsaurus
22-04-2017, 11:28 AM
0.003 / 0.004 inches

https://m.youtube.com/watch?v=2YuMIV-1MeE
azar
22-04-2017, 02:36 PM
How to expose the gap of the stars is I know. I know what shim set on the rotor. But I do not know where to look the gap on the rotor.
azar
22-04-2017, 02:38 PM
https://www.instagram.com/p/BSbaa7NBvCo/
azar
22-04-2017, 02:41 PM
14755 rotor
azar
22-04-2017, 02:42 PM
Where to watch the rotor clearance?
HVACRsaurus
22-04-2017, 09:11 PM
14756Gap is between star and casing (area shown centre of your "rotor" photograph) (the smooth flat surface directly beside the main rotor)
azar
22-04-2017, 10:29 PM
Thank you - I know about this break. The rupture of stars is regulated by round gaskets. And I'm interested in the gap, which is regulated by semi-circular gaskets.
HVACRsaurus
22-04-2017, 11:01 PM
Page 24?

http://www.hvac-studio.com/_src/TechInfo.Item/62_files/202436465/daikin%20si50-203.pdf
azar
23-04-2017, 08:57 AM
This is another compressor. The design is different.