View Full Version : Carrier 06BA Semihermetic compressors

17-05-2006, 08:20 AM
Does anyone have a capacity chart for a Carrier 06BA-277-600 semihermetic recip compressors for R22 - The 06B was not a widely sold compressor but I have a couple I want to use but need to confirm capacity

US Iceman
17-05-2006, 09:17 PM
Hi Brads,

I could not find anything for this model number. However, I might suggest you try contacting Carlyle directly via email.


This is the contact page for the US headquarters. At the bottom of this page there is an email link for you to send a brief question.

Hope that helps you.

07-09-2006, 12:23 PM
This compressor was also sold by Copeland (Germany) under the Generic model number D6CN7000. They may have a data table.

It was primarily a high back pressure R22 compressor designated for use on water chillers.

I do not have a capacity chart but would advise pumping rate at around 175 m3/hr - a similar compressor with this pumping rate has a duty of about 170,000 watts at nominal chiller conditions.

07-09-2006, 05:32 PM
Please check/provide the exact nameplate details like the serial numbers, etc. Some are rebuilt units and we need to check on its duty. Some are made for aircon application and some for a lower evaporating temperature. Will try to find the list of models/serial nos. that could be use for a particular evaporating temp.

07-09-2006, 09:01 PM
I too couldn't find anything for the B series - it's not listed on the Carlyle site.

here's a couple of links though to the comparison chart and nameplate explanation


http://www.carlylecompressor.com/Files/Carlyle_Compressor/Local/US-en/documents/574-917_CrossReferenceGuide.pdf (http://www.carlylecompressor.com/Files/Carlyle_Compressor/Local/US-en/documents/574-917_CrossReferenceGuide.pdf)