View Full Version : Comressor GHH-RAND SKK321D
scruw
15-03-2017, 06:15 AM
Hi All Colleagues..
Anyone can help with the drawings for the this compressor SKK321D 1995 y.
I have only a spare parts list. If are you know a limit of the shaft's axial play, it will be great..
Best Regards to All..
avico
17-03-2017, 01:39 PM
The first time heard about this comp brand and model
scruw
21-03-2017, 07:42 AM
Hi avico.. I didn't know either until I met it. it old model 1995 y. manufactured.
RANGER1
21-03-2017, 08:07 AM
Scruw,
From what I see it's an air compressor, is that correct.
If it's refrigeration maybe post a picture, as it might be something else rebadged.
With 321 numbers in it, it sound big capacity like a Howden WRV321.
https://www.howden.com/Brochures/Product%20spec%20sheet%20-%20WRV%20321.pdf
scruw
22-03-2017, 10:04 AM
Tnx RANGER.
it Gas compressor, manufactured be "Schraubenkompressoren Gmbh @ Co..
Unfortunately, im have not a photo now. May be a little later.
Regards.
Josip
22-03-2017, 10:58 AM
Hi, scruw :)
welcome to the RE forums ...
Tnx RANGER.
it Gas compressor, manufactured be "Schraubenkompressoren Gmbh @ Co..
Unfortunately, im have not a photo now. May be a little later.
Regards.
each compressor is a gas compressor ... but seems that GHH-RAND does not make refrigeration compressors, but for transportation or some other duty ... as far as I know ... but ... can you tell us which refrigerant is inside of unit.
Best regards, Josip :)
scruw
28-03-2017, 08:57 AM
Hi Josip.
Tnx for your remark.
Yes indeed, every screw compressor is gas compressor. But I was keeping in mind to the gas butane, not ammonia or any *****. (Like gas in field gathering on oil production). This compressor be installed at the power station. RAND more dont manufactured these compressors and for this reason it is a rarity.
Best regards.
Gerben
28-03-2017, 01:45 PM
I did inspections on 2 off SKK255G (1970) few times in Germany. We always used the Howden clearances for these compressors, they are running on nh3. Axial play: 255-0.125mm max and 321-0.35mm max.
scruw
29-03-2017, 01:33 PM
Hi Gerben.
Thank You for Your help..
Best Regards
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.