Frick RWB II Coalescing filter

[WYLBEK]

How much oil will be needed when replacing Coalescing filter on a RWB II 60.
Thanks

[RANGER1]

http://www.johnsoncontrols.com/-/media/jci/be/united-states/refrigeration/industrial-refrigeration/rwf-ii-frick/files/be_spec_frick_rwf_ii.pdf

Page 7 & 27 may be of use.
See torque setting on coalescer filter but on 27

[RANGER1]

WYLBEK,
From what I can gather 25 gallons oil separator & 3.5 oil cooler.

[WYLBEK]

Thanks Ranger1, I looked up in manual that it holds 35 gallons in machine, but wasn't sure on how much would be in system elsewhere. 25gallons sounds good to me.

[HVACRsaurus]

Hey,

Don't forget - the Coalescor is on the weir (dry) side of the separator baffle..

Replacement of the Coalescor should not be impacted by oil in the separator.

Happy tinkering

[RANGER1]

Hey,

Don't forget - the Coalescor is on the weir (dry) side of the separator baffle..

Replacement of the Coalescor should not be impacted by oil in the separator.

Happy tinkering

Normally we would just change coalescer, Frick recommend change oil as well, because it is a fine filter I guess they want the best for new filters.