PDA

View Full Version : Thickness of fins







A.Mortezania
09-03-2017, 06:37 PM
Hi friends,

Do you know what is usual thickness of fin of DX evaporator and condenser of most of companies ?

Sincerely yours.

thebrockenshire
15-04-2017, 08:09 AM
there is no "usual thickness". It greatly depends on the application e.i. low temp have wider spacing and medium temp evaps have closer spacing.

A.Mortezania
19-04-2017, 07:16 PM
there is no "usual thickness". It greatly depends on the application e.i. low temp have wider spacing and medium temp evaps have closer spacing.

Hi my friend,

Sorry, There is misunderstanding. My mean is not FPI (Fin per inch) that at low temperature we should use lower FPI on evaporators.
My mean is exactly thickness of aluminum fins.

Sincerely yours.

narkom
19-04-2017, 08:12 PM
It depends on the heat exchanger geometry. The thickness may be 0.1; 0.13;0.16;0.18;0.21.....0.4mm.