samp
03-03-2017, 04:29 PM
Hi I'm new,
I just want to remove the front cover.
photo of my unit below:
I have removed the top part of the cover above the air intake but the front cover removal is confusing. I have the installation manual but the language is confusing and not proper english. I have removed 6 screws (3 underneath, 3 on the front), the cover is now loose and can move about a centimetre forwards but i can't seem to pull it off, I'm trying not to use too much force because it feels like it's being stopped by something. I'm trying to pull the bottom down and forward so that it hinges back at the top, but it gets stuck after about 1.5cm. But am i doing this wrong? is there a trick I'm missing?
thanks for any pointers.
14651
from the installation manual:
14652
I just want to remove the front cover.
photo of my unit below:
I have removed the top part of the cover above the air intake but the front cover removal is confusing. I have the installation manual but the language is confusing and not proper english. I have removed 6 screws (3 underneath, 3 on the front), the cover is now loose and can move about a centimetre forwards but i can't seem to pull it off, I'm trying not to use too much force because it feels like it's being stopped by something. I'm trying to pull the bottom down and forward so that it hinges back at the top, but it gets stuck after about 1.5cm. But am i doing this wrong? is there a trick I'm missing?
thanks for any pointers.
14651
from the installation manual:
14652