PDA

View Full Version : Arctic chill modular chiller service password



Woodfoot
01-01-2017, 11:21 PM
Our company was awarded a new contract for a replacement facility. Our heat recovery chiller has decided it doesn't want to act right, it's an arctic chill modular chiller, 270 tR with 10 modulars. Initially, the compressors would stage up on 5 minute intervals, but since a power outage (this is not on emergency power) the compressors stage up at 10 seconds intervals causing it to trip on low evap temp. The user set points has a password of 0011, however we are in need of the service password. Being that it is a new facility, warranty is a fight and we are not permitted to call contractors out directly. Any assistance would be greatly appreciated.

Brian_UK
02-01-2017, 12:52 AM
Can you identify the control module, is it Danfoss mcx for example?

Woodfoot
26-01-2017, 01:17 PM
Can you identify the control module, is it Danfoss mcx for example?

Sorry for the delay and thanks for responding. The only information I see on the control module says the following:

Carel
DATE 28-Aug-2012
S.N. A0077903 rev. 1.026
ROHS code PGD0000100

Below is a picture of the label (hopefully it will show)
14605