Heat pump to do underfloor heating and cooling

[eurocooling]

Hi can anyone tell me the best model to do underfloor heating and cooling

[The Viking]

Samsung TDM will do both for you.

[eurocooling]

Thank you does Daikin do this as well

[hyperion]

Yes the Daikin Monobloc EBHQ model and the Split System EHBX are reversible to give heating or cooling.

[eurocooling]

Hi will this do radatiors underfloor heating for winter and then cooling for summer

[hyperion]

Yes these will, but you will need to install fan coil units for cooling as you will get condensation forming on the radiators which will become unsightly and eventually cause them to rust.
Pumping chilled water through the underfloor loops is also not a good idea as you could get condensation forming under the floor, which would soak into the insulation rendering it next to useless.

[eurocooling]

Thanks for info can I not shut the underfloor off in the summer with valves

[hyperion]

Yes you can. Just a simple 2 port motorised valve will do the job.

[chemi-cool]

You should look into solar heating, There are a lot of sunny days and you could be saving a lot of money.

[eurocooling]

Yes chemi we have over 320 days a year so free energy as in the winter it's light until 5.45 pm

[milly01blog]

Splits sometimes become nose pain. BTW people your thoughts on the heat pump worth.

[Cexarr]

I want to choose a heat pump for house underfloor heating. My friend advises to install heat pump from Husky company (http://www.huskyheatpumps.co.uk/). I read a lot of about them, and it looks good. What can you say? What would you recommend?

[Worcester]

I want to choose a heat pump for house underfloor heating. My friend advises to install heat pump from Husky company (http://www.huskyheatpumps.co.uk/). I read a lot of about them, and it looks good. What can you say? What would you recommend?

At the quality end Panasonic or Daikin

at the value end Samsung or Mitsubishi

The Husky sales people are just that sales people, not technical engineers.
We wont install them, in fact the insist on doing it themselves and then wont give us the manuals to go and maintain them.....