PDA

View Full Version : MYCOM compressor N6B and FM160L-M manual







bato87
07-09-2016, 09:27 AM
Hello,I am new on this forum.
I just start to work in meat industry as a operator for cooling system,I had no previous experience.
They have old MYCOM compressor N6B and screw compressor FM160L-M.
I have not found manual for this compressor.
These two links :
http://www.mayekawausa.com/techdata/index.html
http://www.mycomcanada.com/downloads/ManualsDL.html
have instructions for newer compressor.
Where to find manual or manual for similar compressor.
Sorry for bad English.

Thanks

cduque
07-09-2016, 02:18 PM
Hi bato87,

I have manuals of those kind of compressors in pdf format, if you send me an email adress I can send you. When you say N6B I imagine you refer to N6WB, right?

bato87
08-09-2016, 09:04 AM
Hi bato87,

I have manuals of those kind of compressors in pdf format, if you send me an email adress I can send you. When you say N6B I imagine you refer to N6WB, right?

They have N6B,I don't now is N6B similar with N6WB,I think they are similar.I found manual for N6WB.

Can you send me manual for FM160L-M?My email is batop87@gmail.com.

Thanks

bato87
08-09-2016, 09:04 AM
Hi bato87,

I have manuals of those kind of compressors in pdf format, if you send me an email adress I can send you. When you say N6B I imagine you refer to N6WB, right?

They have N6B,I don't now is N6B similar with N6WB,I think they are similar.I found manual for N6WB.

Can you send me manual for FM160L-M?My email is batop87@gmail.com.

Thanks

RANGER1
09-09-2016, 04:08 AM
This should get you out of trouble!

http://www.hosbv.com/data/specifications/4808_4808%20-%20Mycom%20160M-M.pdf

bato87
09-09-2016, 11:12 AM
Thank you!!!!!!!!!!!

RANGER1
09-09-2016, 10:04 PM
They have N6B,I don't now is N6B similar with N6WB,I think they are similar.I found manual for N6WB.

Can you send me manual for FM160L-M?My email is batop87@gmail.com.

Thanks

Bato87,
Main difference is valve springs & plate,

- WB use heavier springs which are not interchangeable, as won't clip into valve plate.
- water cooled heads on "B" have water jacket cast into head.
- Shaft seal is single type in "B" & double "WB", but interchangeable.

That"s about it.