PDA

View Full Version : Door reversal Zanussi 97-99







QueensKing
23-08-2016, 11:56 AM
Hi

If anyone has this model... Please help!
I can't make any sense of step 3, if I remove the 3 retaining bolts the fridge will collapse and the door will still be screwed into the hinge. I can't unscrew the door as the bold disappears into the door.

https://goo.gl/photos/jKTA7PHCNvuZEjqcA

Not a clue!

chemi-cool
23-08-2016, 05:50 PM
Maybe its time to call an expert with experience? It helps in cases when you get stuck with simple things and the manual is awkward....

Tayters
23-08-2016, 09:27 PM
I take it there is a similar fitting on the other side?
Can't you wedge something under the front of the fridge to stop it dropping down.

QueensKing
24-08-2016, 10:53 AM
Hi

There is a another hinge of the same type on the other side, so no reason to move it. Only thing I can think of is to lay the whole thing down and remove everything. The manual makes no mention of this though, even has a picture on the fridge in an upright position...

Oh well...

QueensKing
24-08-2016, 10:54 AM
Hi

There is a another hinge of the same type on the other side, so no reason to move it. Only thing I can think of is to lay the whole thing down and remove everything. The manual makes no mention of this though, even has a picture on the fridge in an upright position...

Oh well...