fridgeID
05-08-2016, 04:08 PM
Hi!
My Indesit domestic fridge has an evaporation tray at the back on the top of a warm part (sorry, don't know the name of that bit). The silicon or whatever is stuck to the metal warm bit but the plastic tray has come loose and so when it gets filled with water from the fridge, overbalances and spills onto the floor.
How can I reattach the plastic tray to the warm bit so the heat can transfer and evaporate the water again?
Help!
FridgeID of Lancashire :)
My Indesit domestic fridge has an evaporation tray at the back on the top of a warm part (sorry, don't know the name of that bit). The silicon or whatever is stuck to the metal warm bit but the plastic tray has come loose and so when it gets filled with water from the fridge, overbalances and spills onto the floor.
How can I reattach the plastic tray to the warm bit so the heat can transfer and evaporate the water again?
Help!
FridgeID of Lancashire :)